

README.TXT               NCFadal V1.2 
==========                
                          02/15/2001

  This README.TXT file contains important information about Fadal
  Machining Centers' NC Fadal.  Read this file in its entirety for the
  latest information regarding this release of NC Fadal.

======================================================================

  NC Fadal
  ========
NC Fadal is a DNC serial communications utility.  This verison is designed to communicate with Fadal Machining Centers' verticle milling centers ("VMC").


  Floppy Installaion
  ==================

To install on a PC  (or 32MP) that does not have a CD-ROM drive attached, it will be necessary to obtain three 3.5" blank floppy disks.  Copy the contents from each of the sub-directories "\Floppy Install \ Disk{1,2,3}" on the CD to each floppy disk.
Once all three floppies have been copied place floppy #1 in the floppy disk drive of the destination PC (or 32MP) and run "setup.exe" from the A: drive.
Follow the on-screen prompts to complete the installation.


  Online Manual
  =============
An online manual can be found on the CD-ROM in the sub-directory "\Manual".  The manual is stored in Adobe Acrobat format.  It is necessary to have the Adobe Acrobat reader install on your PC before attempting to view the manual.  If you do not have Adobe Acrobat installed on your PC, you can install a copy of it by running the installion program "ar405eng.exe" found on the CD in the "\Manual" sub-directory.
